Ring - Always Home. Watch over your home from your Windows 10 device with Ring’s Wi-Fi connected Video Doorbells and Security Cameras. Ring connects to your Wi-Fi network and sends you instant alerts when people press your Doorbell or trigger the built-in motion sensors. When you answer the alert, you can see, hear and speak to anyone on your. A free 30-day Ring Protect Plus Trial is included with any Ring doorbell or camera purchase unless you are already subscribed to a Plus Plan at the same location of the new device. You can choose to subscribe to Ring Protect at any time to save, review and share all videos and photos captured by your doorbell or camera, and you will be charged.

Ring Doorbell Installation Instructions

There are lots of different smart video doorbells available today. Many of these products need to be connected to your doorbell’s existing wiring. But what if you don’t have a doorbell? Don’t worry. You can still enjoy the convenience and security that a smart doorbell brings without any current wiring. Here’s how to install a Ring doorbell without an existing doorbell, and how to charge your doorbell.

Without wiring, your Ring doorbell will not have a power source. Therefore, the first thing that Ring recommends you need to do is fully charge the battery.

How to Charge a Ring Doorbell

Remove the battery from the bottom of the Ring doorbell.
Plug the Ring doorbell battery to a power source using the orange USB cable. The battery will be fully charged if the light on top turns green, and there is no orange light.
Insert the battery back into the Ring device.

The battery should last at least 6 months,depending on how often the doorbell is used. To avoid downtime, you canpurchase a 2nd battery to keep as a replacement.

How to Install a Ring Doorbell without an Existing Doorbell

Now that you know how to charge your Ring doorbell’s battery, you can proceed to installing the doorbell. Follow the steps below:

Insert the level tool into the front of your Ring device. You will need to do this before you add the faceplate. The level tool is included in the Install Tools box. It is a small orange bar with some fluid inside.
Using the level tool, position the Ring Doorbell where you want it installed. You want the device to be around 4 feet off the ground (at chest height). The bubble in the level tool should be dead center.
Mark off the mounting holes using a pencil. This step is only necessary if you are installing your Ring video doorbell on stucco, brick, or concrete. For this kind of installation, you will need to use the provided bit to drill a hole into your wall. Then insert the provided anchors into the holes.
Screw your Ring doorbell into the wall.
Place the faceplate on the Ring video doorbell. Insert the top of the faceplate at an angle and slot it into place until it clicks. Make sure that you remove the level tool first.
Tighten the security screws by the bottom of the doorbell. Use the screwdriver and star-shaped security screw provided to tighten the faceplate into place.

Note: Before you install your doorbell, make sure that you download the app and set up your Ring doorbell account first.

Now that you know how to install a Ring video doorbell without an existing doorbell, check out our guide on how to boost your WiFi signal, so it can reach your device.

~~$199.99~~

HelloTech.com

in stock

Amazon.com

Was this article helpful?

For a Ring Doorbell to work effectively, it must be positioned properly. However, what that means differs depending on your home and the version of the Ring Doorbell that you have. With the right placement and angle, a Ring Doorbell can work well for any home.

Ring recommends mounting the doorbell approximately 48 inches above the ground. The doorbell must be mounted flat against a door frame, door, or wall, but there are additional installation kits that adjust the vertical and horizontal angle of a Ring Doorbell as well.

Whether you are a new Ring Doorbell owner or moving to a new place, you will need to know all the details of how to position your Ring Doorbell, including the steps and tools you will need.

Ring Doorbell Positioning

There are several factors to consider when positioning your Ring Doorbell:

Power Source
Height
Angle

Ring Doorbell Power Source

First, where you place your Ring Doorbell will depend on its primary power source:

If you have the Ring Doorbell Pro, it must be hard-wired to your home’s existing doorbell wires. However, this limits your options for positioning your doorbell.
If you want more positioning flexibility, you may want to consider a battery-operated Ring Doorbell or Doorbell 2. These doorbells can be installed anywhere on a door frame, door, or outer or side wall of your home.
While Ring’s Peephole Cam is also battery-operated, it must be installed on a door’s existing peephole, so there is no flexibility when positioning this video doorbell.
The Ring Doorbell Elite offers some placement flexibility. It is powered with an ethernet cord from your home’s internet router. You can place the doorbell where your home’s existing doorbell is located, or you can cut a hole in your door frame or wall and feed the ethernet cord through it. The doorbell can be installed at any place where it can be connected to the ethernet cord.

Ring Doorbell Height

Ring Doorbells work best when mounted about 48 inches or 4 feet above the ground. Place your doorbell at this height whether you are mounting it on a door frame, door, or outer wall of your home.

This below eye-level height prevents the motion sensors from detecting movement far from your door, such as cars passing by or people walking their dogs on the sidewalk. The motion sensors can detect motion from five to 30 feet away with a range of up to 160 degrees horizontally.

Your doorbell’s camera has a much larger vertical field of view than the motion sensor does, so you will be able to see people’s faces as they approach your door even though the camera is below eye level.

To give you a better idea of what your camera will see, here is a table with each Ring Doorbell’s field of vision.

Ring Doorbell Angle

Ring offers two different types of additional installation kits that change the angle of your Ring Doorbell.

The Wedge Kit gives you the ability to angle your doorbell up or down from five to 15 degrees.
The Corner Kit allows you to adjust the horizontal angle of your doorbell from 15 to 55 degrees.

The Ring Doorbell 2 and Doorbell Pro come with both the wedge and the corner kit. If your Ring Doorbell does not come with an installation kit, make sure to choose the kits compatible with your device.

These installation kits are particularly helpful if you have a hard-wired doorbell because they give you more flexibility to position your doorbell at the best angle. For example, if your doorbell is higher than four feet off the ground, you can use the wedge kit to angle it down and avoid unwanted motion alerts.

To use the Ring Corner and Wedge Kits:

Position the angle mount where you would like your doorbell to go and check the level with the provided level tool.
Using the provided drill bit or screwdriver, screw the shorter two screws into the mount’s top and bottom holes.
For installation on a brick, concrete, or stucco wall, use the provided anchors in the screw holes. (The anchors are not needed for installing an angle mount on wood.)
You can increase the doorbell’s angle by removing the screws, placing an additional mount over the first one, and screwing the mounts into place using the longer screws.
Attach your doorbell to the angle mount(s). If you want to use both a corner mount and a wedge mount, install the corner mount, then the wedge mount, and then the doorbell.

Finding the Best Ring Doorbell Placement

Don’t be afraid to get creative when installing your Ring doorbell and test different placements and angles until you find the perfect position to optimize the performance of your video doorbell.

There are some limitations

Ring Doorbell With Free Installation